At Paramelt B.V. in Heerhugowaard, SealteQ Ivacon was tasked with treating the existing steel industrial floor by applying an anti-slip coating. Due to frequent use of the industrial floor, it had become less slip-resistant. For safety reasons, the floor was made more slip-resistant. SealteQ has a solution for applying anti-slip coatings to every type of substrate.
The content of this page has been translated automatically and may contain minor errors.
Applying non-skid coating to steel floor at Paramelt
Work Activities
The work began with pre-treatment of the steel mezzanine floor. The process started by grinding the floor with minimal dust generation. Subsequently, a bonding primer was applied and fully saturated with fire-dried sand. A grain size of 0.1 – 0.5 mm was used. 2 kg of aggregate was used per m2. A grain size of 0.1 – 0.5 mm is easily maintainable. Consideration was given in advance to ensure that the aggregate used for slip resistance would not create obstacles during cleaning operations. After curing, excess sand was removed using specialized equipment by sweeping and vacuuming. Following the cleaning operations, a roller coat of BASF Mastertop BC 372 was applied. The consumption was 0.5 kg per m
Completion
During the execution of work on the steel mezzanine floor, no special incidents occurred. Good preparation generally results in few setbacks during execution. The project was completed to the satisfaction of Paramelt B.V.
Specialties
Related markets
View the next project
Floors in Willinkplein parking garage in Emmen renovated and provided with new coating system
SealteQ Noord has been commissioned by the Municipality of Emmen to renovate the floors of the existing parking garage and provide them with a new coating layer. Additionally, they have been contracted by AKOR Bouw bv to apply a similar coating system to the floor adjacent to the existing -1 floor.