On behalf of a machine factory in Emmen, SealteQ has provided a workshop floor with an epoxy trowel floor finish.
The content of this page has been translated automatically and may contain minor errors.
Workshop floor fitted with an epoxy trowel floor finish
Epoxy Trowel Floor
Initially, the existing floor was degreased and intensively deep cleaned. This was necessary for the subsequent steps required for applying the epoxy trowel floor finish. An epoxy trowel floor is excellently resistant to chemical substances, mechanical stress, and is, among other things, highly impact and wear-resistant.
After cleaning the floor, it was then mechanically blasted and made dust-free. Such pre-treatment ensures extra cleanliness and also provides a sufficiently adhesive surface. For certainty, the pre-treated floor was provided with a tolerant epoxy primer layer that adheres well to such a substrate. If this were not the case, the primer layer and the subsequent epoxy trowel could start to detach.
After applying the primer, the floor was provided with a mottled platinum grey colored epoxy trowel. Finally, the trowel floor was sealed with a transparent thixotropic epoxy mass. Meanwhile, the lathes and milling machines have been replaced, and the floor is fully loaded.
Interested in a Commercial and/or Industrial Synthetic Floor?
SealteQ has the expertise to apply protective and/or decorative coatings to new and existing commercial floors in full compliance with specific requirements. The range of possibilities and systems is very extensive.
View the next project
Life extension maintenance Vve building Couperusstraat
Last week, SealteQ began Phase 2 of the life-extending maintenance measures at the VvE building on Couperusstraat in Groningen. Last year (Phase 1), twenty-four balconies on the rear side of the building were already structurally reinforced with carbon fiber reinforcement. Phase 2 will consist of a four-week period during which SealteQ will carry out various works related to concrete and steel preservation. These activities will include coating the balconies, railings, ceiling, and roof edge.